Using And Configuring Sleep Mode - Toshiba Portégé R830 Series User Manual

Starting again from Hibernation mode
To start up the computer from Hibernation mode, press the power
button until the ON/OFF light glows green. The computer returns to
the screen(s) you were using.
If you put the computer in Hibernation mode by closing the display
panel, you can start it again by opening the display panel.

Using and configuring Sleep mode

To turn off the computer using the Sleep command:
1
Start button
(Sample Image) Shut down menu
2
Configuring Sleep mode options
You can place the computer into Sleep mode by either pressing the
power button or closing the display panel. You can also specify an
amount of time after which the computer automatically goes into
Sleep mode.
Downloaded from LpManual.com Manuals
Click Start, and then click the arrow next to the Shut down
button in the lower-right corner of the Start menu.
Click Sleep in the pop-up menu.
The computer saves the status of all open programs and files to
the memory, turns off the display, and enters into a low-power
mode. The ON/OFF light blinks amber indicating the computer
is in Sleep mode.
Getting Started
Turning off the computer
Arrow
95
Sleep