Figure 49. Opening the retainer
6. Remove the protective cover from the microprocessor socket. To avoid damaging the pins in the
microprocessor socket, do not touch the pins while removing the cover.
Figure 50. Removing the microprocessor socket cover
7. Remove the new microprocessor from the protective cover that protects the gold contacts on the
bottom of the new microprocessor.
8. Hold the new microprocessor by the edges and align the notches
microprocessor socket. Then, install the microprocessor into the socket.
76
ThinkServer RD230 Hardware Maintenance Manual
1
on it with the tabs
2
in the