Create And Manage Raid 0 - Acer Altos R310 Service Manual

To Rebuild RAID 1
If a RAID 1 is created with Build and Clear and then stopped, the Rebuild function of the utility can be
used to resume.
1. Select the RAID 1 Array from the list of Arrays.
2. Press <Ctrl>+<R> to begin the rebuild operation.
To Mark/Unmark an Arrays as Bootable
1. Select an array from the List of Arrays.
2. Press <Ctrl>+<B> to toggle wether an array is bootable.

Create and Manage RAID 0

Create RAID 0 from new drives
1. Initialize the drvies.
2. In the Main Menu, select Create Array, and press <Enter>.
3. Press the <Ins> (or, on some keyboards, <Insert>) key to add the new drive(s) to the Selected Drives
field.
Appendix D 87