To Verify a RAID 1
If a RAID 1 is created using Quick lnit, this utility can be used to verify the array.
1.
Select the RAID 1 Array from the List on Arrays.
2.
Press <Ctrl>+<S> to begin RAID verification.
3.
Press <Y> or <N> to accept or decline automatic repairs by the utility.
To Rebuild RAID 1
If a RAID 1 is created with Build and Clear and then stopped, the Rebuild function of the utility can be used
to resume.
1.
Select the RAID 1 Array from the list of Arrays.
2.
Press <Ctrl>+<R> to begin the rebuild operation.
To Mark/Unmark an Array as Bootable
1.
Select an array from the List of Arrays.
2.
Press <Ctrl>+<B> to toggle wether an array is bootable.
Chapter 2
37