Acer Altos R310 Service Manual page 46

8. Using the <Tab> key, scroll to the Create RAID via field and select No Init. Press <Enter> to continue.
9. With the <Tab> key, scroll to Done, and press <Enter> to exit the utility.
Create RAID 0 from source drive
1. Instll a new HDD and initialize it.
2. From the Main Menu, select Create Array, and press <Enter>.
3. Press the <Ins> key to add to the new drive(s) to the Selected Drives field.
4. Press the <Enter> key to confirm your selection.
5. In the Array Type field, move the cursor to RAID 0 (Stripe) and press the <Enter> key.
6. Use the <Tab> key to scroll to the Array Label field and enter text to identify the array. Press <Enter> to
confirm the array's label.
7. Scroll to Stripe Size, by using the <Tab> key, and select 16KB, 32KB, or 64KB using the arrow keys.
Press <Enter> to confirm the array stripe size.
8. Using the <Tab> key, scroll to the Create RAID via field and select Migrate. Press <Enter> to continue.
9. With the <Tab> key, scroll to Done, and press <Enter>
10. Select the Source Drive, and press <Enter> followed by <Y>
40 Chapter 2