Dell PowerEdge 2550 Rack Installation Instructions page 6

Figure 1-6.
Figure 1-7.
Figure 1-8.
Figure 1-9.
Figure 1-10.
Figure 1-11.
Figure 1-12.
Figure 1-13.
Figure 1-14.
Figure 1-15.
Figure 1-16.
Figure 1-17.
Figure 1-18.
Figure 1-19.
Figure 1-20.
Figure 1-21.
Figure 1-22.
Figure 1-23.
Figure 1-24.
6
Conte n ts
Installing the Center-Mount Brackets
to the Support Tray . . . . . . . . . . . 1-8
Installing the Support Tray in a Rack
With Universal-Hole Spacing . . . . . . . . 1-9
Installing the Support Tray in a Rack
With Wide-Hole Spacing
Securing the System in the Rack
(Flush-Mounted Tray Shown on
Universal-Hole Spacing Rack)
Two-Post RapidRails Rack Kit
Components . . . . . . . . . . . . .
Installing the Slide Assemblies for
Center-Mount Configuration . . . . . . .
Positioning Brackets for Flush-Mount
Installation . . . . . . . . . . . . . .
Installing the Slide Assemblies
for Flush-Mount Configuration
Installing the System in the Rack
(Flush-Mount Configuration) . . . . . . .
Securing the System in the Rack
(Flush-Mount Configuration) . . . . . . .
Installing the Cable Management Arm
Attaching the Strain Relief Bracket
Four-Post RapidRails Rack Kit Contents
One Rack Unit . . . . . . . . . . . . .
Using the Template to Mark
Vertical Rails . . . . . . . . . . . . .
Installing the Slide Assemblies
Installing the System in the Rack
Installing the Cable Management Arm
Attaching the Strain Relief Bracket
. . . . . . . . 1-10
. . . . . . 1-11
1-12
1-15
1-16
. . . . . . 1-17
1-18
1-19
. . . 1-20
. . . . 1-21
. . 1-23
1-24
1-25
. . . . . . 1-27
. . . . . 1-29
. . . 1-30
. . . . 1-31