Dell PowerEdge 2550 Rack Installation Instructions page 13

F i g u r e 1 - 5 . I n s t a l l i n g t h e S u p p o r t Tr a y i n a R a c k W i t h W i d e - H o l e
S p a c i n g
12-24 x 0.5-inch
pan-head Phillips
screws (4)
Center-Mount Installation
Position the left-hand, center-mount bracket with the stamped "L" on its side so that it
1
faces the stamped "L " on the left side of the support tray. Ensure that the four holes on
the side of the bracket align with the four matching holes on the left side of the
support tray.
Secure the left-hand, center-mount bracket to the support tray using
2
four 10-32 x 0.375-inch truss-head Phillips screws with #10 star washers
(see Figure 1-6).
R
Ra c k In s ta l lati on Gui de
1-7