Remote Mouse Receiver; Ibm/Mac Mouse Cable; Ps/2 Mouse Adapter; Mac Mouse Adapter - Toshiba TLP-511U Owner's Manual

Operations

Operating the computer

by the remote control
Connecting the REMOTE MOUSE RECEIVER
Check that the power of the computer is turned off.
Connect the REMOTE MOUSE RECEIVER.
Remove the mouse actually used and change it to the supplied cable.
PV-98

REMOTE MOUSE RECEIVER

(supplied)
Downloaded from www.Manualslib.com
If you connect the iREMOTE MOUSE
RECEIVER to the computer, the supplied
remote control can work as a mouse of the
computer.
USB Mouse cable
(supplied)
IBM/Mac USB
IBM/MAC
Mouse adapter
Mouse cable
(supplied)
Mouse adapter
manuals search engine
USB
PORT
IBM PC
DOS/V
SERIAL
PORT
PS/2
(supplied)
PS/2
MOUSE
PORT
MAC
Macintosh
(supplied)
MAC
MOUSE
PORT
CONTENTS
Notes
• To operate the projector and the computer by
the remote control, place the REMOTE
MOUSE RECEIVER close to the projector.
• When connecting the REMOTE MOUSE
RECEIVER to an IBM PC/DOS V computer,
use the supplied PS/2 mouse adapter if you
are using a PS/2 mouse, or connect the
supplied IBM/MAC cable directly to your
computer if you are using a serial mouse.
• When connecting the REMOTE MOUSE
RECEIVER to the USB PORT for the first
time, insert the "Windows98 CD-ROM" and
install the device drivers for a USB
interchangeability device and a USB human
interface devices (two kinds). The installation
starts automatically when you connect a USB
mouse cable connected to the remote mouse
receiver to the USB port of your computer.
25
(Continued)