Konica Minolta bizhub PRO C5501 Release Notes page 9

Installing IC-304 Print Controller 2.1
2. From the Start menu, select Settings > Control Panel > Add or Remove
Programs.
3. In the Add or Remove Programs window, select IC-304 print controller and click
Change/Remove.
4. When the ColorServerGUI message appears, click Yes.
5. After the GUI has been successfully uninstalled, click OK.
6. Restart the IC-304 print controller.
7. Insert the version 2.1 stand alone DVD (P/N 607-00254 ) into the DVD device
and browse to the IC-304_v2.1 folder.
8. Double-click the setup.exe file.
Note: If you did not remove the software as described in step 3, you will prompted to
remove the software at this stage.
9. In the License Agreement window, click Yes. Wait until the installation is
completed.
Important: In certain cases, during the installation process you might receive the
Feature transfer error: 0
installation exits. When you start the installation again, the
PostInstReg is not removed message
the installation completes with no more problems.
10. Click Finish to restart the IC-304 print controller.
The system is restarted and the IC-304 print controller software automatically
starts.
11. From the Help menu, select About to verify that IC-304 V2.1 is installed.
The next step is to restore the configuration that you backed up in the previous
section. When you restore the configuration, all the custom spot colors, virtual
printers, new fonts, color profiles etc. are saved again into the IC-304 V2.1 software.
Note: After upgrading to version 2.1, you need to reconfigure the IC-304 virtual printers on
your client workstations. For more infomation about reconfiguring the IC-304 print controller
virtual printers, see Reconfiguring the IC-304 Print Controller virtual printers in Windows on
page 4 and Reconfiguring the IC-304 Print Controller virtual printers in Mac OS on page 5.
message. When you close this message, the
Directory
appears. Close this message, and
3