Simulating Jobs With Your Template - Konica Minolta bizhub PRO C5501 Release Notes

Pro Kit Features

Simulating Jobs With Your Template

4. Type the new name, and press E
To edit template settings:
1. In the Imposition Template Builder, from the Method list, select the imposition
method, and then select the template that you want to edit.
2. Change the desired settings.
3. Click Save.
To delete a template:
1. In the Imposition Template Builder, from the Method list, select the imposition
method, and then select the template that you want to delete.
2. Click Delete.
3. Confirm that you want to delete the selected template.
You can simulate how jobs from the Storage window will look if you apply an
imposition template to them.
Note: The impostion template parameters are not actually applied to the job
are viewing only a simulation of how the job would look if this template were
Imposition
selected on the
To simulate a job with a specific imposition template:
1. In the Imposition Templates Builder window, click the Simulate button.
2. Click Browse.
The Storage window appears.
3. Select a job, and then click Select.
The parameters of the job (Sheet Size, Trim Size, Trim Orientation, Sets per
sheet, Bleed Size, Rotate 90, Crop Marks, and Fold Marks) appear with their
values in the Simulate Imposition window.
Note: Both RTP and non-RTP jobs are available for simulation.
4. Change the parameters as desired.
.
NTER
tab.
25
— you