Playing External Audio Devices With The Built-In Speakers ([Aux In] Jacks); Showing The Instrument's Display Contents On A Separate Tv Monitor - Yamaha CVP-309PE Owner's Manual

[AUX OUT (LEVEL FIXED)] Jacks
(RCA pin jacks of [L]and [R])
When these are connected (with RCA pin plug; LEVEL
FIXED), the sound is output to the external device at a
fixed level, regardless of the [MASTER VOLUME] con-
trol setting. Use these when controlling volume with an
external audio system, or recording the instrument's
sound to an external audio system. Connect the instru-
ment's AUX OUT [L]/[R] (LEVEL FIXED) jacks and the
AUX IN jacks of an external audio system using appro-
priate audio cables.
OPTICAL
OUT
Instrument
(LEVEL FIXED)
L/L+R R L R
AUX OUT
Pin plug
Audio cable
[OPTICAL OUT] Terminal
This is used for optical output of digital audio (fre-
quency: 44.1kHz) for highest sound quality. The output
level from the [OPTICAL OUT] terminal is fixed and is
unaffected by the master volume control on the instru-
ment. Use an appropriate optical cable to connect this
terminal to the optical digital input terminal of a minid-
isk (MD) recorder or CD recorder. (Make sure the con-
nectors of the cable match the terminals on both
devices.)
Since digital transfer allows you record a clear, noise-
free signal with no degradation or distortion, you can
record your favorite performances with the highest pos-
sible quality.
OPTICAL
OUT
Instrument
(LEVEL FIXED)
L/L+R R L R
AUX OUT
Optical digital cable
4 Playing External Audio Devices with
The stereo outputs from another instrument can be con-
nected to these jacks, allowing the sound of an external
instrument to be reproduced via the instrument's speak-
ers. Connect the output jacks (LINE OUT etc.) of an
external synthesizer or the tone generator module and
the instrument's AUX IN [L/L+R]/[R] jacks using appro-
priate audio cables.
Stereo system
AUX IN
Pin plug
n
• Use only the [L/L+R] jack for connection with a monaural device.
• The instrument's [MASTER VOLUME] setting affects the input
5 Showing the Instrument's Display
Connect the instrument to an external TV monitor, and
you can have the current display contents or lyrics (for
group sing-alongs and the like) displayed on the TV. For
instructions on connecting, see page 53.
MD deck etc.
Optical digital
input terminal
Connecting Audio & Video Devices
the Built-in Speakers ([AUX IN] Jacks)
Instrument
L/L+R R
AUX IN
Phone plug (standard)
Audio cable
CAUTION
When the sound of an external device is output to the
instrument, first turn on the power to the external device,
then to the instrument. Reverse this order when you turn
the power off.
signal from the [AUX IN] jacks.
Contents on a Separate TV Monitor
Video out settings
1
Call up the operation display.
[FUNCTION] → [G] VIDEO OUT
2
Select the video equipment standard "NTSC"
or "PAL" by using the [1π
the contents of the Video Out signal—the
current display contents (LCD) or lyrics (LYR-
ICS)—by using the [3π
1 2 3 4
CVP-309/307 Owner's Manual
Synthesizer
Tone generator
LINE OUT
Pin plug
† ] button. Select
π † π †
π †
† ]/[4π † ] buttons.
π † π π † † π † π π † †
5 6 7 8
185