Adjusting The Microphone And Harmony Sound - Yamaha CVP-309PE Owner's Manual

Adjusting the Microphone and Harmony Sound

164 CVP-309/307 Owner's Manual
HARMONY1/2/3 VOLUME Sets the volume of the first (lowest), second, and third (highest)
HARMONY1/2/3 PAN
HARMONY1/2/3 DETUNE
PITCH TO NOTE
PITCH TO NOTE PART
Adjusting the Microphone and Har-
mony Sound
1
Press the [MIC SETTING/VOCAL HARMONY] button.
A
B
C
D
E
1
2
Press the [I] (MIC SETTING) button to call up the MICROPHONE SET-
TING display.
harmony notes.
Specifies the stereo (pan) position of the first (lowest), second,
and third (highest) harmony notes.
Random
The stereo position of the sound will change randomly when-
ever the keyboard is played. This is effective when the Har-
mony mode (page 167) is set to "VOCODER" or "CHORDAL."
L63>R – C – L<R63
A setting of L63>R pans the sound hard left, while C is at cen-
ter, and L<R63 is at hard right.
Detunes the first (lowest), second, and third (highest) harmony
notes by the specified number of cents.
When this is set to "ON," you can "play" the voices of the Clavi-
nova with your voice. (The Clavinova tracks the pitch of your
voice and converts it to note data for the tone generator. Keep in
mind, however, that dynamic changes in your voice do not affect
the volume of the tone generator.)
Determines which of the Clavinova parts will be controlled by
the lead vocal when the Pitch to Note parameter is "ON."
1 2 3 4 5
F
G
H
I
J
2
6 7 8