Basic Displays (Main Display And File Selection Display); Main Display - Yamaha CVP-309PE Owner's Manual

Basic Displays (Main Display and File
Selection Display)
There are two basic display types – Main and Selection. Here are explanations of
each display segment and its basic operation.

Main Display

The Main display shows the current basic settings of the instrument such as the cur-
rently selected Voice and Style, allowing you to see them at a single glance. The
Main display is the one you'll usually see when you play the keyboard.
1
2
3
4
1 Voice name
• RIGHT 1 (indicated at the right edge of the display):
Voice name currently selected for the RIGHT 1 part (page 73).
• RIGHT 2 (indicated at the right edge of the display):
Voice name currently selected for the RIGHT 2 part (page 73).
• LEFT (indicated at the right edge of the display):
Voice name currently selected for the LEFT part (page 73).
Pressing one of the [A], [B] and [F]–[I] buttons calls up the Voice Selection display for
each part (page 31).
2 Song name and related information
Displays the currently selected Song name, time signature and tempo.
If the Song contains the chord data, the current chord name will be displayed in the
"CHORD" segment (see 3 below).
Pressing the [C] button calls up the Song Selection display (page 34).
3 Style name and related information; current chord name
Displays the currently selected Style name, time signature and tempo.
If the [ACMP ON/OFF] button is set to On, the chord specified in the chord section of the
keyboard will be displayed.
Pressing the [D] button calls up the Style Selection display (page 45).
4 Internet function
Pressing the [E] button calls up the Internet Direct Connection display (page 170).
5 Registration Memory Bank name
Displays the currently selected Registration Memory Bank name.
Pressing the [J] button calls up the Registration Memory Bank Selection display (page 126).
6 Volume Balance
Displays the volume balance among the parts.
Adjust the volume balance among the parts by using the [1π†]–[8π†] buttons.
7 Transpose
Displays the amount of transposition in semitone units (page 53).
8 Tempo
Displays the current tempo of the Song or Style.
9 BAR (current position of the Song or Style)
Displays the current position of the Song or bar and beat number from playback start of the Style.
) Registration Sequence
Appears when the Registration Sequence is active (page 128).
7 8 9

Basic Displays (Main Display and File Selection Display)

)
5
6
Returning to the Main display
Here's a convenient way to
return to the Main display from
any other display: Simply press
the [DIRECT ACCESS] button,
then the [EXIT] button.
CVP-309/307 Owner's Manual 59