Playing An External Audio Device With The Built-In Speakers - Yamaha PSR-E360 Owner's Manual

Let's enjoy playing the keyboard !
Recording
Record your performance as a User Song (Song number 113, up to
approx. 300 notes), which can then be played back on the instrument.
1
Select the desired Voice.
Apply sustain (page 9) or effect (page 21) to the sound as desired before start-
ing recording.
2
Press [PHRASE REC] y to enter the Record mode.
To exit from the Record mode, press this button again.
3
Play the keys in the Record mode to start the recording.
4
Stop the recording by pressing the [>/
5
To listen to the recorded Song and stop the playing, use [>/
Initialization
This operation initializes the backup parameters and the User Song. While holding down the highest white key, press the [
power on.
12
PSR-E360 Owner's Manual

] (Start/Stop) !5 .

].
Playing an External Audio Device with the Built-in
Speakers
1
Turn off the power for both the external audio device and this instru-
ment.
2
Connect the audio device to the
instrument's [AUX IN] jack @4 .
Use an audio cable with no resis-
tance having a stereo-mini plug on
one side for connecting to this
instrument, and a proper plug to
match the output jack of the exter-
nal audio device on the other side.
3
Turn on the audio device, and then
this instrument.
4
Start play back of the connected
audio device.
The sound of the audio device is
output through the speakers of this
instrument.
5
Stop playback of the audio device.
NOTICE
• When turning off the power, first turn off the power to the instrument, and then to the
external device to avoid damage to the devices.
Stereo-mini
plug
Audio device
(portable audio player, etc.)
] (Standby/On) switch to turn the