Oki ES1624nMFP Handy Reference page 35

Troubleshooting
Paper Jams (cont'd)
(a)To remove a sheet with its
leading edge at the front of the
belt ( ), carefully lift the sheet,
1
pull it forward into the drum
cavity and withdraw it.
(b)To remove a sheet from the
central area of the belt (
carefully separate the sheet
from the belt surface and
withdraw the sheet.
3
2
1
(c)To remove a sheet just entering
the fuser (
3
),
2
), separate the
trailing edge of the sheet from
the belt, push the fuser pressure
release lever (
front and down to release the
fuser's grip. Withdraw the sheet
through the drum cavity area.
Then allow the pressure release
lever to rise again.
Note: If the sheet is well advanced
into the fuser (only a short length is
still visible), do not attempt to pull
it back. Follow the next step to
4
remove it.
8. Starting with the cyan image
drum (
replace the four image drum
units making sure to locate
them in the correct order.
34
) towards the
4
) unit nearest the fuser,
1