Resetting The Base (Terminal); De-Registering A Handset; Renaming The Base (Terminal) - Xerox 3100MFPX - Phaser B/W Laser Instructions Manual

S
ETTINGS

Resetting the base (terminal)

When you reset your base, all the base
parameters are reset to their initial values
(factory settings).
On the navigator key
until the SETTINGS screen is displayed,
press OK to confirm.
Select ADVANCED SET.. Press Valid.
Select SET BASE. Press Valid.
Select RESET BASE using
Valid. .
A confirmation screen will prompt you to
confirm your request:
• To reset the base, press Yes
• If you do not wish to reset the base,
press No .
Enter the base code. Press Valid.
RE-INIT. IN PROCESS
displayed on the screen.
To exit the menu, press the red key
When resetting the base, the base
code becomes 0000 again.

De-registering a handset

This function enables you to de-register a
handset from your base. This may be
necessary if you have lost a handset or if you
already have 6 handsets registered to the
same base.
, press or
.
.
or . Press
.
. The
message is
.
34
On the navigator key
until the SETTINGS screen is displayed,
press OK to confirm.
Select ADVANCED SET.. Press Valid.
Select SET BASE. Press Valid.
Select DELETE HANDSET using
Press Valid. .
Select the handset you wish to unregister in
the list by pressing
Valid. .
A screen prompts you to confirm the
unregistration. Press Yes
the handset.
To exit the menu, press the red key

Renaming the base (terminal)

On the navigator key
until the SETTINGS screen is displayed,
press OK to confirm.
Select ADVANCED SET.. Press Valid.
Select SET BASE. Press Valid.
Select RENAME BASE using
Valid. .
Select the base for which you want to modify
the name using or
Enter the new name using the keypad. Press
Valid. .
To exit the menu, press the red key
, press or
.
or
or . Press
to unregister
.
, press or
.
or . Press
. Press Valid. .
.
.
.
.