Timer; Changing The Programmed Time Of The Timer; Changing The Timer Ring Tone - Xerox 3100MFPX - Phaser B/W Laser Instructions Manual

A
CCESSORIES
The list of ring tones appears.
Select the desired ring tone using
Press Volume
setting screen.
Press or to increase or decrease the
volume.
Once the volume is set, press Valid.
An information screen shows the alarm clock
settings, press Valid.
To exit the menu, press the red key

Timer

The timer function activates the handset
ringer at a programmed time. You can view
the programmed time on the screen.
Incoming calls are displayed directly
without interrupting the timer. For
access to timer adjustment you must
stop it once it is started.
Once the specified time has elapsed, the
handset rings for 60 seconds and the alarm
screen is activated. Turn off the alarm by
pressing Stop
ging.
On the navigator key
until the ACCESSORIES
displayed, press OK to confirm.
Select TIMER using
Valid. .
or
to access the volume
.
. The handset stops rin-
, press or
screen
or . Press
• To launch the timer without changing the
.
displayed delay, press Start
• To change the programmed time, press
Edit
A list showing the different settings appears.
Changing the programmed time of
the timer
.
Select SET DURATION in the list. Press
Valid.
Enter the desired time. Press Valid.
Press Return
.
activation screen.
The timer activation screen appears with the
modification. Press Start to launch the
timer.

Changing the timer ring tone

To modify the timer ring tone, select RING
TONE using keys
The list of ring tones appears, the handset
plays the ring tone.
Select the ring tone using keys
Press Volume
setting screen.
Press or
volume. Once the volume is set, press
is
Valid.
Press Return
screen appears.
Launch the timer by pressing Start
23
.
.
to display the timer
or . Press Valid.
to access the volume
to increase or decrease the
.
, the timer activation
.
.
.
or .
.