Ring Tones; Changing The Ring Tones; Activating Or Deactivating The Beeps - Xerox 3100MFPX - Phaser B/W Laser Instructions Manual

R
ING TONES
R
ING TONES
This menu allows you to modify the ring
tones and particularly:
• to assign different ring tones for incoming
calls outsides or intercom (between
handsets),
• to activate or deactivate tones being
sounded when pressing the keypad or
when validating the settings information
of your handset.
• activate or deactivate silent mode.

Changing the ring tones

This menu enables you to associate a unique
ring tone to incoming calls or internal calls
(intercom).
On the navigator key
until the RING TONE screen is displayed,
press OK to confirm.
Select EXTERNAL CALL or INTERNAL
CALL using or
Select the ring tone of your choice using
the or keys then press Volume
Adjust the ringer volume using
Valid. .
To exit the menu, press the red key
, press or
. Press Valid. .
or , press
Activating or deactivating the
beeps
On the navigator key
until the RING TONE screen is displayed,
press OK to confirm.
Select BEEPS using
Valid.
Select the beep type using
Valid.
KEYTONE: the handset beeps when a key is
pressed.
BATTERY LOW: the handset beeps when
the battery is too low.
CHARGER: the handset beeps when you
hang up the handset.
An information screen displays the beep
status for the selected item (Active or
Inactive).
• To change the status, press Edit
The status is modified on the screen.
Press Valid.
.
• To keep the status, press Valid.
To exit the menu, press the red key
.
25
, press
or
.
.
.
or
. Press
or . Press
.
.
.