Emulation - Options Descriptions; Ipds Emulation; Host Resolution - Lexmark 6500e User Manual

3.3 EMULATION – Options Descriptions
In the following an asterisk "*" indicates the default factory value. The selected value for each of these
options can be printed; see Printing the Menu Settings Page on page 10.

3.3.1 IPDS Emulation

This option selects the printer emulation to be used when processing IPDS data. It is important to select the
correct emulation before receiving IPDS data. The IPDS Printer and Host Setup Guide includes guidelines
for selecting the emulation.
Resident*
3812/3816
Printing with Double Byte Character Set (DBCS) is not supported in the "3812/3816" emulation.

3.3.2 Host Resolution

Specifies the resource resolution support for raster font and IM1 image reported to the host in the XOA
OPC command. The resolution selected determines the printer resident raster fonts which are activated.
For example, 240 dpi raster fonts will be activated with a setting of "240", but not at the "300" or "600"
setting.
Reply to host indicates support for IM1 image and any dpi raster fonts. Captured raster
Auto*
fonts of any resolution are only activated when the activation request is accompanied
by a matching Font Resolution and Metric Technology Triplet.
240 240 dpi raster font and 240 IM1 image support is reported to the host. Captured raster
fonts of other resolutions will not be activated unless a matching Font Resolution and
Metric Technology Triplet is received with the request.
300 300 dpi raster font and 300 IM1 image support is reported to the host. Captured raster
fonts of other resolutions will not be activated unless a matching Font Resolution and
Metric Technology Triplet is received with the request.
600 600 dpi raster font and 600 IM1 image support is reported to the host. Captured raster
fonts of other resolutions will not be activated unless a matching Font Resolution and
Metric Technology Triplet is received with the request.
Note: If you select the "3812/3816" emulation in the IPDS Emulation option, the Host Resolution is
forced to "240 dpi".
This printer's native emulation
IBM 3812/3816 emulation
15