Micropdf417 - Lexmark 6500e Technical Reference Manual

MicroPDF417

Key Type
/Symbology name
/Units name
/ModuleWidth int
/ModuleHeight int
/Rows int
/Columns int
Range Default value
n/a n/a
/300ths /600ths
/600ths
/1200ths
240–12000 (dec) 945 (dec)
03 B1 (hex)
480–60000 (dec) 1890 (dec)
07 62 (hex)
4–44 (dec) 0 (dec)
00 (hex)
1–4 (dec) 0 (dec)
00 (hex)
Arguments for MaxiCode bar code symbology
Description
Required
Identifies the bar code symbology
(/MicroPDF417)
Optional
/Units is used for /ModuleWidth and
/ModuleHeight calculations.
Optional
Sets the X dimension of the module
(white or black rectangle) in 100th of an
inch. To set the X dimension to default at
600 dpi requires a value of 9.45, which is
specified here as 945 decimal.
Note: Values beyond the defined range
are appropriately clipped and set to the
minimum and maximum values.
Optional
Sets the Y dimension of the module
(white or black rectangle) in 100th of an
inch. To set the Y dimension to "default"
at 600 dpi requires a value of 18.9, which
is specified here as 1890 decimal.
Notes:
• The range of Y dimension is
dependent on the value of X
dimension, such that,
Min=2 * X dimension, and
Max=5 * X dimension.
• Values beyond the defined range
are appropriately clipped and set to
the minimum and maximum values.
Optional
This is an automatic operation specified
by using 0.
Optional
This is an automatic operation specified
by using 0.
93