Asus F1A75-M PRO R2.0 User Manual page 41

9. USB 2.0 connectors (10-1 pin USB34, USB56, USB78, USB910)
These connectors are for USB 2.0 ports. Connect the USB module cable to any of
these connectors, then install the module to a slot opening at the back of the system
chassis. These USB connectors comply with USB 2.0 specification that supports up to
480Mbps connection speed.
F1A75-M PRO R2.0
F1A75-M PRO R2.0 USB2.0 connectors
Never connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
The USB 2.0 module is purchased separately.
10. USB 3.0 connector (20-1 pin USB3_56)
This connector is for the additional USB 3.0 ports. Connect the USB 3.0 bracket cable
to this connector, then install the USB 3.0 bracket to the rear side of the chassis. If your
chassis support customized front panel installation, with ASUS USB 3.0 header, you
can have a front panel USB 3.0 solution.
F1A75-M PRO R2.0
F1A75-M PRO R2.0 USB3.0 Front panel connector
The USB 3.0 module is purchased separately.
ASUS F1A75-M PRO R2.0
USB78 USB910
PIN 1 PIN 1
USB3_56
PIN 1
USB34 USB56
PIN 1 PIN 1
1-29