Table of Contents
Advertisement
2.6
Monitor menu
The Monitor menu displays the system temperature/power status, and allows you to change
the fan settings.
EFI BIOS Utility - Advanced Mode
Ai Tweaker
Main
CPU Temperature
MB Temperature
CPU Fan Speed
Chassis Fan 1 Speed
Chassis Fan 2 Speed
Power Fan Speed
CPU Q-Fan Control
Chassis Q-Fan Control
CPU Voltage
3.3V Voltage
5V Voltage
12V Voltage
Anti Surge Support
2.6.1
CPU Temperature / MB Temperature [xxxºC/xxxºF]
The onboard hardware monitor automatically detects and displays the CPU and motherboard
temperatures. Select Ignore if you do not wish to display the detected temperatures.
2.6.2
CPU / Chassis / Power Fan Speed [xxxx RPM] or [Ignore] /
[N/A]
The onboard hardware monitor automatically detects and displays the CPU / chassis / Power
fan speeds in rotations per minute (RPM). If the fan is not connected to the motherboard, the
field shows N/A. Select Ignore if you do not wish to display the detected speed.
2.6.3
CPU Q-Fan Control [Disabled]
[Disabled]
Disables the CPU Q-Fan control feature.
[Enabled]
Enables the CPU Q-Fan control feature.
CPU Fan Speed Low Limit [600 RPM]
This item appears only when you enable the CPU Q-Fan Control feature and allows
you to disable or set the CPU fan warning speed.
Configuration options: [Ignore] [200RPM] [300 RPM] [400 RPM] [500 RPM] [600 RPM]
Chapter 2: BIOS information
Advanced
Version 2.00.1201. Copyright (C) 2011 American Megatrends, Inc.
Monitor
CPU Temperature
+45ºC / +113ºF
+34ºC / +93ºF
4515 RPM
N/A
N/A
N/A
Disabled
Disabled
+1.216 V
→←: Select Screen
↑↓: Select Item
+3.328 V
Enter: Select
+/-: Change Opt.
+5.160 V
F1: General Help
F2: Previous Values
+12.000 V
F5: Optimized Defaults
F10: Save
Enabled
Exit
Boot
Tool
ESC: Exit
2-21
Advertisement
Table of Contents
