Before You Proceed; Onboard Led - Asus F1A55-M LX Series User Manual

1.4

Before you proceed

Take note of the following precautions before you install motherboard components or change
any motherboard settings.
• Unplug the power cord from the wall socket before touching any component.
• Before handling components, use a grounded wrist strap or touch a safely grounded
• Hold components by the edges to avoid touching the ICs on them.
• Whenever you uninstall any component, place it on a grounded antistatic pad or in the
• Before you install or remove any component, switch off the ATX power supply and
Standby Power LED
The motherboard comes with a standby power LED that lights up to indicate that the system
is ON, in sleep mode, or in soft-off mode. This is a reminder that you should shut down
the system and unplug the power cable before removing or plugging in any motherboard
component. The illustration below shows the location of the onboard LED.
F1A55-M LX PLUS
F1A55-M LX PLUS Onboard LED
1-4
object or a metal object, such as the power supply case, to avoid damaging them due to
static electricity.
bag that came with the component.
detach its power cord. Failure to do so may cause severe damage to the motherboard,
peripherals, or components.
ON
Standby Power
SB_PWR
OFF
Powered Off
Chapter 1: Product introduction