Chapter 1: Product Introduction; Before You Proceed - Asus PRIME H610I-PLUS Manual

Chapter 1: Product Introduction

Product Introduction
1.1

Before you proceed

Take note of the following precautions before you install motherboard components or change
any motherboard settings.
•
•
•
•
•
•
•
PRIME H610I-PLUS
E22166_PRIME_H610I-PLUS_UM.indd 1 E22166_PRIME_H610I-PLUS_UM.indd 1
Unplug the power cord from the wall socket before touching any component.
Before handling components, use a grounded wrist strap or touch a safely grounded
object or a metal object, such as the power supply case, to avoid damaging them due
to static electricity.
Hold components by the edges to avoid touching the ICs on them.
Whenever you uninstall any component, place it on a grounded antistatic pad or in the
bag that came with the component.
Before you install or remove any component, ensure that the ATX power supply is
switched off or the power cord is detached from the power supply. Failure to do so
may cause severe damage to the motherboard, peripherals, or components.
The pin definitions in this chapter are for reference only. The pin names depend on the
location of the header/jumper/connector.
For more information on installing your motherboard, please scan the code below:
1
1-1
2023/8/8 14:39:16 2023/8/8 14:39:16