Ddr Dimm Modules: Ddr1-2; Sdr Dimm Modules: Sdr1-2 - Biostar M7VIG PRO User Manual

M o t
M o t
M o t

DDR DIMM Modules: DDR1-2

DRAM Access Time: 2.5V Unbuffered DDR 200/266 MHz Type
required.
DRAM Type: 64MB/ 128MB/ 256MB/ 512MB/ 1GB DIMM Module (184
pin)
DIMM Socket
Location
DDR 1 64MB/128MB/256MB/512MB/1GB
DDR 2 64MB/128MB/256MB/512MB/1GB
The list shown above for DRAM configuration is only for reference.

SDR DIMM Modules: SDR1-2

DRAM Access Time: 3.3V Unbuffered SDR 100/133 MHz Type required.
DRAM Type: 64MB/ 128MB/ 256MB/ 512MB/ 1GB DIMM Module (184
pin)
DIMM Socket
Location
SDR 1 64MB/128MB/256MB/512MB/1GB
SDR 2 64MB/128MB/256MB/512MB/1GB
The list shown above for DRAM configuration is only for reference.
When you use DDR SDRAM, the memory power will
automatically set to 2.5V.
When you use SDRAM, the memory power will automatically set
to 3.3V.
For the above settings, you can only use one kind of memory on
this motherboard. It is forbidden to insert both kind of memory
simultaneously. You must insert only DDR or SDRAM.
h e r b o a r d D e s c r i p
h e r b o a r d D e s c r i p
h e r b o a r d D e s c r i p
DDR Module
*1
*1
SDR Module
*1
*1
4
t i o n
t i o n
t i o n
Total Memory
Size (MB)
Max is
2GB
Total Memory
Size (MB)
Max is
2GB