Vcore Waveform Measurement-Ver1.2 - Biostar M7TDB Datasheet

VCORE WAVEFORM MEASUREMENT-Ver1.2

Finished Date: 90/07/10
CPU_1.475v setup
1. Select the RUN Button –changes to read "STOP" when operating.
2. Adjust the Toggle Frequency to the desired setting.
3. Adjust the Duty Cycle to the desired setting.
4. Adjust the Slew Rate to the desired setting.
5. Adjust the Icc Maximum Slider Bar while noting the Icc Max(A) Reading to obtain the
desired Maximum Icc Load setting.
54