Vcore Waveform Measurement-Ver1.1 - Biostar M6VLQ Datasheet

VCORE WAVEFORM MEASUREMENT-Ver1.1

Finished Date: 90/10/29
CPU_1.70v setup
1. Select the RUN Button –changes to read "STOP" when operating.
2. Adjust the Toggle Frequency to the desired setting.
3. Adjust the Duty Cycle to the desired setting.
4. Adjust the Slew Rate to the desired setting.
5. Adjust the Icc Maximum Slider Bar while noting the Icc Max (A) Reading to obtain
the desired Maximum Icc Load setting.
52