Cpu Configuration - Asus A8S-X User Manual

OnBoard SiS USB2.0 DEVICE [Enabled]
Allows you to enable or disable the onboard SiS USB 2.0 port.
Configuration options: [Disabled] [Enabled]
The Module Version and USB Devices Enabled items show the
auto-detected values. If no USB device is detected, the item shows
None.
Legacy USB Support [Enabled]
Allows you to enable or disable the legacy USB support. When set to Auto,
the system disables the legacy USB support if there are no USB devices
connected.Configuration options: [Disabled] [Enabled] [Auto]
USB 2.0 Controller Mode [HiSpeed]
Allows you to configure the USB 2.0 controller in HiSpeed (480 Mbps) or
Full Speed (12 Mbps). Configuration options: [HiSpeed ] [Full Speed]
BIOS EHCI Hand-Off [Enabled]
Allows you to stop the EHCI HC in OHCI handover. Enable this item when
installing operating systems that does not support EHCI host controllers.
Configuration options: [Disabled] [Enabled]

2.4.3 CPU Configuration

The CPU configuration menu displays the current CPU configuration.
CPU Configuration
Module Version: 14.08
Physical Count: 1
Logical Count : 1
AMD Athlon(tm) 64 Processor 3200+
Revision: D0
Cache L1: 128KB
Cache L2: 512KB
Speed : 2011MHz
Current FSB Multiplier: 10x
Maximum FSB Multiplier: 10x
Able to Change Freq.
uCode Patch Level
The items in this menu varies depending on the type of processor
installed.
2-16
: Yes
: 0x41
Chapter 2: BIOS Setup