Table of Contents
Advertisement
7.
Chassis intrusion connector (4-1 pin CHASSIS)
This lead is for a chassis designed with intrusion detection feature.
This requires an external detection mechanism such as a chassis
intrusion sensor or microswitch. When you remove any chassis
component, the sensor triggers and sends a high-level signal to this
lead to record a chassis intrusion event.
By default, the pins labeled "Chassis Signal" and "Ground" are shorted
with a jumper cap. If you wish to use the chassis intrusion detection
feature, remove the jumper cap from the pins.
A8S-X SE
A8S-X SE Chassis Intrusion Connector
8.
GAME/MIDI connector (16-1 pin GAME)
This connector supports a GAME/MIDI module. If a GAME/MIDI module
is available, connect the GAME/MIDI cable to this connector. The
GAME/MIDI port on the module connects a joystick or a game pad for
playing games, and MIDI devices for playing or editing audio files.
A8S-X SE
A8S-X SE GAME Connector
The USB/GAME module is purchased separately.
1-26
®
CHASSIS
®
GAME
(Default)
Chapter 1: Product introduction
- Quick Links:
- Motherboard Layout
Hide quick links:
Advertisement
Table of Contents
