Cdrom Drives; Boot Settings Configuration - Asus A8N-SLI - Motherboard - ATX User Manual

4.6.4 4.6.4 4.6.4

CDROM Drives

CDROM Drives CDROM Drives
4.6.4 4.6.4 CDROM Drives CDROM Drives
1. 1st Slave: XXXXXXXXX
F1:Help : Select Item
ESC: Exit : Select Menu
1. 1st Slave: XXXXXXXXX 1. 1st Slave: XXXXXXXXX 1. 1st Slave: XXXXXXXXX
1. 1st Slave: XXXXXXXXX 1. 1st Slave: XXXXXXXXX
Allows you to assign optical drives attached to the system.
4.6.5 4.6.5 4.6.5

Boot Settings Configuration

Boot Settings Configuration Boot Settings Configuration
4.6.5 4.6.5 Boot Settings Configuration Boot Settings Configuration
Boot Settings Configuration
Case Open Warning
Quick Boot
Boot Up Floppy Seek
Bootup Num-Lock
Typematic Rate Setting
x Typematic Rate (Chars/Sec)
x Typematic Delay (Msec)
OS Select For DRAM > 64MB
Full Screen LOGO
Halt On
F1:Help : Select Item
ESC: Exit : Select Menu
Case Open Warning [Enabled] Case Open Warning [Enabled] Case Open Warning [Enabled] Case Open Warning [Enabled] Case Open Warning [Enabled]
Enables or disables the chassis open status feature. Setting to Enabled,
clears the chassis open status. Refer to section "2.7 Internal connectors"
for setting details. Configuration options: [Disabled] [Enabled]
Quick Boot [Enabled] Quick Boot [Enabled] Quick Boot [Enabled]
Quick Boot [Enabled] Quick Boot [Enabled]
Allows you to enable or disable the system quick boot feature. When
Enabled, the system skips certain tests while booting.
Configuration options: [Disabled] [Enabled]
A S U S A 8 N - S L I A S U S A 8 N - S L I
A S U S A 8 N - S L I A S U S A 8 N - S L I A S U S A 8 N - S L I
Phoenix-Award BIOS CMOS Setup Utility
Boot
CDROM Drives
-/+: Change Value
Enter: Select Sub-menu
Phoenix-Award BIOS CMOS Setup Utility
Boot
[Enabled]
[Enabled]
[Disabled]
[On]
[Disabled]
6
250
[Non-OS2]
[Enabled]
[All, But Keyboard]
-/+: Change Value
Enter: Select Sub-menu
Select Menu
Item Specific Help
Use < > or < > to
select a device, then
press <+> to move it
up, or <-> to move it
down the list. Press
<ESC> to exit this
menu.
F5: Setup Defaults
F10: Save and Exit
Select Menu
Item Specific Help
Press [Enter] to
enable or disable.
F5: Setup Defaults
F10: Save and Exit
4 - 4 1 4 - 4 1
4 - 4 1 4 - 4 1 4 - 4 1