Table of Contents
Advertisement
3. HARDWARE SETUP
19) USB Header (10-1 pin USB2)
If the USB port connectors on the back panel are inadequate, this USB header is
available for two additional USB port connectors. Connect the USB headers to
the 2-port USB connector set and mount the bracket to an open slot on your
chassis.
A7VI-VM
®
A7VI-VM USB Port
20) SMBus Connector (5-1 pin SMB)
This connector allows you to connect SMBus (System Management Bus) de-
vices. SMBus devices communicate by means of the SMBus with an SMBus
host and/or other SMBus devices. SMBus is a specific implementation of an I
bus, which is a multi-device bus; that is, multiple chips can be connected to the
same bus and each one can act as a master by initiating data transfer.
A7VI-VM
®
A7VI-VM SMBus Connector
ASUS A7VI-VM User's Manual
USB2
10
6
5
1
1
SMB
2
C
33
Advertisement
Table of Contents
