Wi-Fi - HTC Radar 4G User Manual

61 Internet connections
Enabling data roaming
Connect to your mobile operator's partner networks and access data services when
you're out of your mobile operator's coverage area.
Using data services while roaming will be costly. Check with your mobile operator
for data roaming rates before you use data roaming.
1. On the Start screen, tap
2. Tap Settings > cellular.
3. Tap the Data roaming options box, and then tap roam.

Wi-Fi

To use Wi-Fi, you need access to a wireless access point or "hotspot". The availability
and strength of the Wi-Fi signal will vary depending on objects, such as buildings or
simply a wall between rooms, the Wi-Fi signal has to pass through.
Connecting to a Wi-Fi network
1. On the Start screen, tap
2. Tap Settings > Wi-Fi.
3. Tap the Wi-Fi networking On/Off switch to turn Wi-Fi on.
You'll then see a list of available wireless networks.
4. Tap the wireless network you want to connect to.
If you selected an open network, your phone will automatically connect to
the network. (Some Wi-Fi networks, such as ones you might find in coffee
shops, restaurants, hotels, or elsewhere, may require you to enter a
password in your web browser before you can connect.)
If you selected a secured network, enter the required password and then
tap done.
When you're connected to a wireless network, the Wi-Fi connected icon
in the status bar and shows you the signal strength (indicated by the number of bands
that light up).
The next time you connect to the same secured wireless network, you won't be asked
to enter the password or other security information again, unless you do a factory
reset.
.
.
appears