Installing And Charging The Battery - HTC Mogul Getting Started Manual

Installing and Charging the Battery

New batteries are shipped partially charged. Before you start
using your device, you need to install and charge the battery.
To install the battery:
1. Press the battery cover latch downward to release the
battery cover.
2. Remove the battery cover.
3. Insert the battery by aligning the exposed copper
part of the battery pack with the protruding copper
conductor located on the upper end of the battery
compartment. Insert the upper side of the battery first,
and then gently push the battery into place.
4. Replace the battery cover.
Press the battery cover latch
downward and then remove
the battery cover.
Section 1: Getting Started 13