General Operation - Dual XDMR6850 Installation & Owner's Manual

XDMR6850 OPERATION
General Operation
Front Panel Note:
Front Panel Removal
Power On/Off
Shift Function
(XM Radio only)
Preset EQ Curves
Set the Clock
6
The front panel is semi-permanently attached during
assembly. Please refer to the separate yellow instructions
(before installation) to make the front panel removable.
With the unit off, press EJECT to allow the front panel to slide
down. Gently squeeze the release tab located on the bottom
center underside and pull front panel down and away from
unit to remove. To install, insert left side first, then push right
side to secure.
Press PWR for  seconds or any other button momentarily
to turn the unit on. Inserting a disc will turn the unit on
automatically. Press PWR for  seconds to turn the unit off.
Press MODE to select between AM/FM, *XM Radio, CD
Mode
player and auxiliary input. Modes of operation are indicated
in the display. *Optional XM Satellite Radio Receiver and
subscription required for XM Radio operation.
Adjust volume using rotary encoder (00-6).
Volume
Press SHIFT for  seconds to activate the SHIFT function.
The SHIFT icon will appear in the display. In XM Radio mode,
the SHIFT function must be active to access the EQ function.
Press SHIFT again for  seconds to cancel.
Press EQ to select between POP, JAZZ, CLASSIC, BEAT,
ROCK and OFF (default) equalization curves. Any adjustment
to the Bass or Treble settings automatically cancels the
current EQ curve (if one is selected).
When in AM/FM, CD or AUX mode:
Display
Press DISP to select between clock and radio frequency
(tuner mode), clock and CD elapsed time/track (CD mode), or
clock and AUX (AUX mode).
When in XM Radio mode:
Press DISP to select between channel name, artist name,
song title or clock.
With the unit on, press and hold DISP until the clock begins to
flash, then release. Press TUNE
ll
TUNE
save the selected time.
to adjust the minutes. Press DISP momentarily to
nn
to adjust the hours and