Kits To Improve Quality Of Cut; Toro Recycler Mulch Plug; Washout Port Kit P/N 95-3282; Cast Deck Height Of Cut Notch Repair Kits - Toro 20351 - High Wheel CARB Walk Power Mower Dealer Manual

Service dealerís guide to great quality of cut

Hide thumbs Also See for 20351 - High Wheel CARB Walk Power Mower:

Operator's manual (21 pages)

Parts catalog (12 pages)

Table Of Contents

Table of Contents

This section describes special kits developed to help

resolve various quality of cut issues.

Toro Recycler Mulch Plug

Model 59134 fits Toro 21-inch Recycler Steel Decks

Model 59135 fits Toro 21-inch Super Recycler Cast

Aluminum Decks

These plugs smooth the surface under the deck while

adding an additional deflector. They fit in the bagging

chute and prevent grass accumulation in that space.

Washout Port Kit

P/N 95-3282

This kit (Figure 76) allows an operator to attach a

garden hose to the deck and circulate water under the

deck by engaging the blade while the water is running.

This prevents grass buildup under the deck.

Figure 76

1. Washout fitting

Coupling

If the underside of the deck is not cleaned after

mowing, the accumulated grass can dry out and bond

to the deck. Once this happens, the hard material must

be scraped from under the deck. This often removes

the protective paint from under the deck.

With a washout port kit, it is easy to hook up a garden

hose and clean the cutting chamber after each use.

Many models currently have this kit factory installed.

However, it can be used on most models by finding a

place where the water can run into the cutting chamber

and not hit a kicker or other object.

Service Dealer's Guide to Great Quality of Cut