LG WM2277HS Owner's Manual page 22

TROUBLESHOOTING GUIDE ....
Problem
Possible Cause
• Water suppty is not adequate
in area_
• Water supply taps are not
completely open,,
• Water inlet hose is bent
• The filter of the inlet hose
clogged
• Drain hose is bent
or clogged,,
• The drain filter is clogged
, Load is too small.
• Load is out of balance.
• The appliance has an imbalance
detection and correction system
i_individual heavy aMicles are
loaded (bath mat, bath robe,
etc.) and the imbalance is too
great, after severat atlempts to
restart the spin cycle the
machine will stop and the error
code will be displayed
• Is the door opened or not
completely closed?
Solution
Check another tap in the house
Fully open tap.
Straighten hose
Check the filter o[ the inlet hose,
Clean and straighten the drain hose
CIean the drain fi]ter
Add 1 or 2 similar items to help
balance the load
Rearrange load to allow proper
spinning
Close the door completely
* If dE is not released, call for service
• The water overfills due to the
faulty water valve.
• The water level sensor
malfunction.
• Overload in motor.
• Overload in motor,
Unplug the power plug and ca]l for service
Close the water tap,
Unplug the power plug
Call for service
• The washer experienced a Restart the cycle
power failure
22