Front Panel - BBE DS24 User And Reference Manual

®
2
1. LCD
The 2x20 backlit LCD displays the program and programming choices of the unit.
2. <Back/Next>
These buttons allow navigation for selection of sub-menus and some parameter values.
3. Menu
This is one of two buttons that will access the front panel programming. This one is used
primarily to select which program to call up, edit or save.
4. Gain
This is one of two buttons that will access the front panel programming. This, along with
the <Back/Next> buttons, accesses the various parameters of a program.
5. Quit
This exits the programming menu and returns the display to showing the selected pro-
gram.
6. Enter
Hitting this button will write the current selection to memory.
7. Param
This acts as the value selection dial when selecting certain parameters or values for cer-
tain parameters (such as Gain). It is both a dial and a button. DO NOT PRESS IN WHEN
ROTATING OR THE VALUES MAY NOT TRACK CORRECTLY.
8. Meters
These display the respective input and output levels of the device. The seven LED seg-
ments per display are in 6 dB steps from –30dbV to –6dBV, then -3dBV, then Limit (0dBV),
then Clip (+8 dBV)
9. Mute
Pressing one of these buttons will mute the respective Output channel and the LED will
illuminate. All outputs will mute automatically during certain program selection and edit-
ing processes, to protect the loudspeakers.
10. Power
This turns the power to the unit On and Off. Remember to always turn power amps on last
after everything else and turn them off first, before everything else.

FRONT PANEL