Using The Sirius Menu; Connecting Using Hdmi - Pioneer ELITE VSX-92TXH Operating Instructions Manual

Pioneer audio/video multi-channel receiver operating instruction
Hide thumbs Also See for ELITE VSX-92TXH:
Table of Contents

Advertisement

Other connections

Using the SIRIUS Menu

The SIRIUS Menu provides additional SIRIUS Radio
1
features.
1
Press TOP MENU.
Use / to select a menu item then press ENTER.
2
Choose between the following menu items:
• Channel Skip/Add – Use / and ENTER to select
channels you would like to remove/restore from/to
the channel guide.
• Parental Lock – Use / and ENTER to select
channels you would like to place under parental lock.
Channels put under parental lock are not displayed in
the Channel Guide, but may be accessed by directly
inputting their channel number and providing the
parental lock password.
• Antenna Aiming – Check the strength of satellite
and terrestrial reception.
• Memory Recall – Use / to browse your saved
song information (see Tip above).
• Password Set – Set the parental lock password.
3
When you're finished press TOP MENU to return to
the reception display.

Connecting using HDMI

If you have a HDMI or DVI (with HDCP) equipped compo-
nent, you can connect it to this receiver using a commer-
cially available HDMI cable.
The HDMI connection transfers uncompressed digital
video, as well as almost every kind of digital audio that the
connected component is compatible with, including
DVD-Video, DVD-Audio, SACD, Dolby Digital Plus, Dolby
Note
1 You can reset the Channel presets, Memory, Channel Skip/Add, Parental Lock and Password settings in Resetting the system on page 75.
2 • An HDMI connection can only be made with DVI-equipped components compatible with both DVI and High Bandwidth Digital Content Protection
(HDCP). If you choose to connect to a DVI connector, you will need a separate adaptor (DVIHDMI) to do so. A DVI connection, however, does not support
audio signals. Consult your local audio dealer for more information.
• If you connect a component that is not compatible with HDCP, a HDCP ERROR message is displayed on the front panel display. Some components
that are compatible with HDCP still cause this message to be displayed, but so long as there is no problem with displaying video this is not a malfunction.
• This receiver has been designed to be compliant with HDMI (High Definition Multimedia Interface) Version 1.3a. Depending on the component you
have connected, using a DVI connection may result in unreliable signal transfers. Also, when using a component with HDMI version 1.0, it is not possible
to output copy-controlled DVD-Audio CPPM sources from the HDMI connection.
• This receiver supports the DeepColor feature of HDMI. However, when analog signals are input, this receiver cannot output signals in DeepColor.
• This receiver supports SACD, Dolby Digital Plus, Dolby TrueHD and DTS-HD Master Audio. To take advantage of these formats, however, make sure
that the component connected to this receiver also supports the corresponding format.
2
TrueHD, DTS-HD Master Audio (see below for
limitations), Video CD/Super VCD, CD and MP3. See
About the video converter on page 13 for more on HDMI
compatibility.
HDMI/DVI-equipped component
HDMI OUT
MULTI-ZONE
& SOURCE
MULTI-ZONE
/REC SEL
& SOURCE
OUT1
ZONE3
IN
1
OUT2
MAIN
IN
2
LAN (10/100)
ZONE2
HDMI
OPTICAL
IN
1
CONTROL
IN
1
2
IN
IN
1
IN
(TV/SAT)
OUT
IN
2
IN
2
(BD)
1
IN
Y
3
IN
(DVR/
(DVD/
VCR 1)
LD)
4
IN
3
P
IN
B
(CD-R)
1
4
ASSIGN-
ABLE
P
R
1
1
2
IN
(DVD/
IN
4
IN
2
LD)
Y
2
(CD)
IN
(BD)
COAXIAL
P
B
OUT
IN
P
R
XM
ASSIGNABLE
(VIDEO/GAME 1)
1
4
ASSIGNABLE
DIGITAL
COMPONENT VIDEO
HDMI IN
HDMI/DVI-compatible monitor
or plasma display
1
Use an HDMI cable to connect one of the HDMI IN
interconnects on this receiver to an HDMI output on
your HDMI component.
HDMI indicator lights on the front panel when an HDMI-
equipped component is connected.
2
Use an HDMI cable to connect the HDMI OUT
interconnect on this receiver to an HDMI interconnect
on a HDMI-compatible monitor.
AUDIO
ANTENNA
PHONO
FM UNBAL 75 Ω
AM LOOP
IR
IN
ZONE2
MULTI-ZONE & SOURCE
ZONE2
OUT
R
L
CD
OUT
IN
MONI-
TOR
MONI-
(DVD/LD)
OUT
TOR
DVD/LD
OUT
IN
(BD)
ASSIGN-
OUT
ABLE
BD
1
2
IN
CD-R/
TAPE/
OUT
MD
TV/SAT
Y
IN
1
IN
IN
R
R
VIDEO /
P
B
GAME 1
IN
2
IN
SUB W.
C
P
OUT
R
SUR-
DVR/
ROUND
VCR 1
IN
3
IN
Y
R
P
OUT
B
DVR/
SURROUND BA
VCR 2
P
IN
R
1
12 V TRIGGE
R
L
(DC OUT 12V/
1
3
TOTAL 50 mA MAX)
S-VIDEO
VIDEO
AUDIO
VSX-94TXH
08
55
En

Advertisement

Table of Contents
loading

This manual is also suitable for:

Elite vsx-94txh

Table of Contents