Transmittable Documents - Sharp UX-4000M - UX 4000 B/W Laser Printer Service Manual

[3] Transmittable documents

1. Document Sizes
width
Normal size
length
(Max.)
(Min.)
letter
128 mm
148 mm 216 mm
[Normal size]
* With special sizes, only one sheet can be fed into the machine at a
time. Insert next page into feeder as current page is being scanned.
2. Paper Thickness & Weight
Indication
Weight Metric system
indication indication
Thickness Metric system
indication indication
Document Document size
size Range
Number of Document size
ADF sheets Weight
Paper Kind
quality
3. Document Types
• Normal paper
Documents handwritten in pencil (No. 2 lead or softer), fountain pen,
ball point pen, or felt-tipped pen can be transmitted.
Documents of normal contrast duplicated by a copying machine can
also be transmitted.
• Diazo copy (blueprint)
Diazo copy documents of a normal contrast may be transmitted.
• Carbon copy
A carbon copy may be transmitted if its contrast is normal.
148 – 210 mm
128 – 297 mm
(Max.)
1.0 m
279 mm
216 mm
[Special size]
Product specifications
Lower Limit Upper Limit
2 2
52g/m 80g/m
0.06mm 0.1mm
Minimum (148mm 128mm)
A4 (210mm 297mm)
Letter (216mm 279mm)
Legal (216mm 356mm)
Minimum ~ Letter/A4 size 20sheets
Legal 1 sheet
More than 90 kg
Below 135kg 1 sheet
Paper of fine quality/bond paper/
Kent paper
4. Cautions on Transmitting Documents
• Documents written in yellow, greenish yellow, or light blue ink cannot
be transmitted.
• Ink, glue, and correcting fluid on documents must be dry before the
documents can be transmitted.
• All clips, staples and pins must be removed from documents before
transmission.
• Patched (taped) documents should be copied first on a copier and
then the copies used for transmission.
• All documents should be fanned before insertion into the feeder to
prevent possible double feeds.
5. Automatic Document Feeder Capacity
Number of pages that can be placed into the feeder at anytime is as
follows:
Normal size: max. 20 sheets
Special size: single sheet only (manual feed)
•
NOTES: If you need to send or copy more 20 pages, place the ad-
ditional pages and carefully in the feeder just before the
last page is scanned. Do not try to force them in, as this
may cause double-feeding or jamming.
•
If your document consists of several large or thick pages
which must be loaded one at a time, insert each page into
the feeder as the previous page is being scanned. Insert
gently to prevent doublefeeding.
6. Readable Width & Length
The readable width and length of a document are slightly smaller than
the actual document size.
Note that characters or graphics outside the effective document scan-
ning range will not be read.
•
Readable width
208 mm max.
0.16" (4 mm)
•
Readable length
This is the length of the document sent minus 0.2" (5 mm) from the top
and bottom edges.
1 – 3
UX-4000MU
FO-2950MU/C
0.16" (4 mm)
Readable width
0.2" (5mm)
Readable length
0.2" (5mm)