Table of Contents
Advertisement
Setting Cruise Control
I
If you leave your cruise control switch on when
you're not using cruise, you might hit a button
and go into cruise when you don't want to. You
could be startled and even lose control. Keep
the cruise control switch OFF until you want
to use it.
1. Move the cruise control switch to ON.
2. Get up to the speed you want.
3.
4.
Push in the SET button
at the end of the lever
and release it.
Take your foot off the
accelerator pedal.
Resuming a Set Speed
Suppose you set your cruise control at a desired speed
and then you apply the brake. This, of course, shuts off
the cruise control. But you don't need to reset it.
Once you're going about
25
mph
(40
km/h) or more,
you can move the cruise
control switch from ON to
WA (resume/accelerate)
for about half a second.
You'll go right back up to your chosen speed and stay
there. Remember that if you hold the switch at R/A
longer than half a second, the vehicle will keep going
faster until you release the switch or apply the brake.
So unless you want to go faster, don't hold the switch
at WA.
2-39
Advertisement
Table of Contents
