Table of Contents
Advertisement
If your vehicle has a
wheel cover, remove it
by using the flat end of
the wheel wrench.
Pry along the edge of the wheel cover until it comes off.
Be careful, the
r i m
edges may be sharp. Don't try to
remove it with your bare hands.
Note: When replacing any wheel cover, carefully line up
the tire valve stem and the notch in the wheel cover.
If your vehicle has this
aluminum wheel, you may
have plastic wheel nut caps.
Use the wheel nut wrench
to remove the wheel nut
caps
and
to loosen the
wheel nuts.
When re-installing the decorative nut caps, tighten the
caps snugly with the wheel wrench, then continue
one-quarter rotation to secure plastic caps.
If your vehicle has wire
wheel covers, remove
them as follows:
5-26
Advertisement
Table of Contents
