Table of Contents
Advertisement
To replace the battery:
1. Insert a coin into the notch near the keyring. Turn the
coin counterclockwise
to
separate the two halves of
the transmitter.
2. Once the transmitter is separated, use a pencil
to
remove the old battery. Do not use a metal object.
3. Remove and replace the battery. Replace it as the
instructions inside the cover indicate.
4. Snap the transmitter back together tightly to be sure
no moisture can enter.
5. Resynchronize the transmitter by pressing and
holding the LOCK and UNLOCK buttons for about
eight seconds. You must be within range of the
vehicle. When the transmitter has been
resynchronized, the horn will chirp and the exterior
lamps will flash once.
I
NOTICE:
When replacing the battery, use care not to touch
any of the circuitry. Static from your body
transferred to these surfaces may damage
the transmitter.
Trunk
Trunk Lock Release
To unlock the trunk from the outside, insert the door key
and turn it.
Remote Trunk Release
-
-
The TRUNK release button
is on the instrument panel
to the left of the steering
column. The transaxle
must be in PARK (P) or
NEUTRAL (N). If the
remote trunk release button
does not open the trunk,
make sure the remote trunk
release lockout switch
in the glove box is in
the on position.
2-13
Advertisement
Table of Contents
