VMware VSHIELD APP 1.0.0 UPDATE 1 Admin Manual page 112

vShield Administration Guide
Example
vShield# show ip route
Codes: K - kernel route, C - connected, S - static,
> - selected route, * - FIB route
S>* 0.0.0.0/0 [1/0] via 192.168.110.1, mgmt
C>* 192.168.110.0/24 is directly connected, mgmt
Related Commands
ip route
show iptables
Shows the IP routing table.
Syntax
show iptables [filter | mangle | nat | raw]
Option
filter
mangle
nat
raw
CLI Mode
Basic, Privileged
Example
vShield# show iptables
show kernel message
Shows the last 10 kernel messages for a vShield Edge.
Syntax
show kernel message
CLI Mode
Basic, Privileged
Usage Guidelines
vShield Edge CLI
Example
vshieldEdge# show kernel message
Related Commands
show kernel message last
112
Description
Show the packet filtering table.
Show the mangle table. The mangle table is responsible for modification of the TCP packet QoS
bits before routing occurs.
Show the NAT table. NAT facilitates the transformation of the destination IP address to be
compatible with the firewall's routing table.
Show the raw table. The raw table is used to set a mark on packets that should not be handled
by the connection tracking system.
VMware, Inc.