VMware VSHIELD APP 1.0.0 UPDATE 1 Admin Manual page 111
Hide thumbs
Also See for VSHIELD APP 1.0.0 UPDATE 1:
- Programming manual (90 pages) ,
- Quick start manual (30 pages)
Table of Contents
Advertisement
Syntax
show interface [mgmt | p0 | u0]
Option
mgmt
p0
u0
CLI Mode
Basic, Privileged
Example
manager# show interface mgmt
Interface mgmt is up, line protocol is up
index 1 metric 1 mtu 1500 <UP,BROADCAST,RUNNING,MULTICAST>
HWaddr: 00:50:56:9e:7a:60
inet 10.115.216.63/22 broadcast 10.115.219.255
Auto-duplex (Full), Auto-speed (1000Mb/s)
input packets 5492438, bytes 2147483647, dropped 0, multicast packets 0
input errors 0, length 0, overrun 0, CRC 0, frame 0, fifo 0, missed 0
output packets 2754582, bytes 559149291, dropped 0
output errors 0, aborted 0, carrier 0, fifo 0, heartbeat 0, window 0
Related Commands
interface
show ip addr
Shows the protocol addresses configured on a vShield Edge for all devices.
Syntax
show ip addr
CLI Mode
Basic, Privileged
Example
vShield# show ip addr
show ip route
Shows the IP routing table.
Syntax
show ip route [A.B.C.D/M]
Option
A.B.C.D
M
CLI Mode
Basic, Privileged
VMware, Inc.
Description
Management interface
vShield App P0 interface
vShield App port U0 interface
Description
IP address to use.
Subnet mask to use.
Appendix A Command Line Interface
111
Advertisement
Table of Contents
