CERTIFIED INSTALLATION
Certified installations require one roof vent and one lower
side vent.
For "Certified Vent System
For further information contact your dealer or distribu-
tor.
FIG. 9
LOWER VENT CUTOUT
L
FIG. 10
METHODS OF INSTALLATION
The method of installation is shown in FIG. 9. It is es-
sential that all maximum or minimum dimensions are
page 14.
strictly maintained as the performance of the refrigera-
tor is dependent on adequate flow of air
the
NOTE: The upper vent should be centered over the
condenser coil at the back of the refrigerator.
VENTILATION HEIGHTS
CLEARANCES
Minimum clearances in inches to combustible materials
G:
K:
L:
N :
NOTE: Clearance "M" is between the rearmost
the refrigerator and the wall behind the refrigerator.
NOTE: Clearance "N" is the distance between the bot-
tom of the lower vent to the roof material. For ventilation
height, see table VENTILATION HEIGHTS
See Figures 9, and 10.
NOTE: Wood Strip
MUST be in place
refrigerator.
0
Side
0
Bottom
0
0
See NOTE: Clearance "N" below.
part of
7