Standard Usb Port Disabled; Too Many Trays Attached - Dell 2330d - Laser Printer B/W User Manual

The printer discards any data received through the parallel port.
To ignore the message and continue printing, press the Back button
To cancel the print job, press the Cancel button
Ensure that the Parallel Buffer menu item is not set to Disabled. For more information see

56 Standard USB Port Disabled

The printer discards any data received through the USB port.
To ignore the message and continue printing, press the Back button
To cancel the print job, press the Cancel button
Ensure that the USB Buffer menu item is not set to Disabled. For more information, see
58 Too Many Flash Options
Remove the memory from your printer. Your printer supports up to 160 MB for a non-network printer and 288 MB for a
network printer.

58 Too Many Trays Attached

Turn the printer off.
Unplug the power cord from the wall outlet.
Remove the excess trays.
Turn the printer back on.
59 Unsupported Tray <x>
Remove the specified tray, and wait for the message to clear. You must remove the unsupported tray in order to print.
Turn the printer off.
Unplug the power cord from the wall outlet.
Remove the unsupported tray.
Connect the power cord to a properly grounded outlet.
Turn the printer back on.
81 Engine Code CRC Failure
To ignore the message and continue printing, press the Back button
. The current job may not print correctly.
.
. The current job may not print correctly.
.
. The current job may not print correctly.
Parallel Buffer.
USB Buffer.