Dometic CA1000 Installation Manual page 33

_IA_CA1000.book Seite 33 Freitag, 30. Januar 2009 11:12 11
Dometic CA1000
7.3.5 Menu level 4: Space factor
The space factor (03 to 20) affects the power levels of the compressor
and fan in automatic mode. If the space to be cooled is very large, select
a higher space factor:
➤ Start configuration mode (see chapter "Start and end configuration
✓ The first digit of the display (fig. e 5, page 6) shows the menu level
➤ Press the + button (fig. e 6, page 6) three times to switch to menu
➤ Press the Mode button (fig. e 4, page 6) to change the parameter.
✓ The digits in the display flash until the parameter you enter is con-
➤ Use the + and – buttons (fig. e 6 and 7, page 6) to select the temper-
➤ Press the Mode button (fig. e 4, page 6) to confirm your entry.
✓ The set value is saved and is then used when the system is restarted.
✓ You are now in menu level 4 and can use the + and – buttons to switch
7.3.6 Menu level 5: Default setting
You can return the parameters you set in configuration mode on menu
levels 1 to 4 to the default settings:
➤ Start configuration mode (see chapter "Start and end configuration
✓ The first digit of the display (fig. e 5, page 6) shows the menu level
➤ Press the + button (fig. e 6, page 6) four times to switch to menu
✓ The digital display shows
➤ Press the Mode button (fig. e 4, page 6) to return the system to its
✓ The digits in the display
➤ Press the + button.
✓ The digital display shows
➤ Press the Mode button (fig. e 4, page 6) to confirm your entry.
✓ The parameters set in configuration mode are returned to the default setting.
✓ You are now in menu level 5 and can use the + and – buttons to switch
mode" on page 31).
and the second and third show the parameter which can be set.
level 4.
firmed.
ature (in °C) with which the system starts.
between menu levels.
mode" on page 31).
and the second and third show the parameter which can be set.
level 5.
default settings.
between menu levels.
.
00
flash.
00
.
01
Installation
33