HYOSUNG SR 50 R Manual page 48

◉ ◉ CLEAN OF BATTERY TERMINAL
Clean the battery terminal when it is
dusty or rusted.
1. Set the ignition switch "
tion.
2. Disassemble the pillion seat, disassem-
ble the ( + ) positive battery wire after the
( ) negative battery wire.
Remove the battery.
3. Clean the terminal.
If there is white dust, clean it with warm
water.
4. Assemble the battery wires and grease
the terminal lightly.
CAUTION
● ● Keep the battery away from fires.
● ● When disassemble the battery wire,
take off � � terminal first with the igni-
tion switch " "
When assemble, � � terminal first.
● ● Fasten certainly the battery wires.
● ● Incorrect installation of the battery
will reverse the terminal position
resulting in possible electrical sys-
tem damage due to incorrect battery
lead connection.
● ● Never charge a battery while still in
the machine as damage may result
to the battery or regulator/rectifier.
" (OFF) posi-
" " (OFF ) position.
TRANSMISSION OIL
Check if the transmission oil leaks.
ENGINE OIL AND GASOLINE
● Check if there is leakage around the oil
pump and oil tank.
48