HYOSUNG SR 50 R Manual page 45

① While fully applying the brake, check to
see that the extension line of the rear
brake cam lever groove � is within the
index mark � on the crankcase.
② If the extension line is beyond the index
mark, have the brake shoe assembly
replaced by your Hyosung dealer to
ensure safe operation.
◉ ◉ ADJUSTMENT OF REAR BRAKE
LEVER PLAY
Adjust the lever play to 15~25mm
(0.59~0.98in) by screwing in or out the
①
adjusting nut of brake cam lever.
After adjustment, check if it is within the
required range when you squeeze the
brake lever until feel the resistance.
PLAY OF REAR BRAKE LEVER
Standard 15~25mm (0.59~0.98in)
PIN
CAUTION
● ● When it is beyond the index mark,
replace the brake shoe.
� �
● ● Fix
part of nut to pin or serious
accident can be cause by the brake
failure.
①
45
TIRES
Check the tire pressure when it is cold.
TIRE PRESSURE
(COLD INFLATION)
SOLO RIDING DUAL RIDING
FRONT
REAR
NORMAL RIDING
1.25 kg/ ㎠ 1.75 kg/ ㎠
123 kpa 172 kpa
18.0 psi 25.0 psi
2.00 kg/ ㎠ 2.25 kg/ ㎠
196 kpa 221 kpa
29.0 psi 33.0 psi