Table of Contents
Advertisement
Playlist
With playlists, you can watch specific video sections in a desired playback
sequence. This is done by creating a series of video scenarios (entry points)
retrieved from DVD-VR program video clips. DVD DiskRecorder lets you create and
edit playlists from your DVD-VR disc.
To add or edit a playlist:
1. Click the Playlist tab.
2. Select a playlist to edit or click Add playlist
a playlist, select it from the list then click Remove playlist
3. From the Program list, select a program and use the Jog Bar and the mark-
in/mark-out buttons. Then, click
a playlist.)
4. To add more playlists or programs, repeat steps 2 to 4.
5. You can use [Ctrl] or [Shift] to select multiple programs from Program list and
drag them to the Playlist entry point list. Use edit buttons to join
separate
entry points as needed.
Setting the name for a program, playlist, or entry point
You can assign names to programs, playlists, and entry points in order to easily
identify them.
To set a program name:
1. On the Program tab, select a program from the Program list.
2. Click Set program name
3. Enter the name, and then click OK. The new name is shown in the Program list.
To set a playlist name:
1. On the Playlist tab, select a playlist from All playlists.
2. Click Set playlist name
3. Enter the name, and then click OK. The new name is shown in All playlists.
. (You can also drag and drop programs to
.
.
to create a new one. To delete
.
291
or
Advertisement
Table of Contents
